-Click here to sort by number instead-
 Castle Molds |
 Gothic Molds |
 Fieldstone Molds |
 Cavern Molds |
 Village Molds |
 Egyptian Molds |
 RomanMolds |
 Sci-Fi Molds |
 Floor Molds |
 roof Molds |
 |
Description |
 |
|---|---|---|
| Basic Block Mold #40 | ||
| Used for building simple walls and structures. Contains several long one-piece blocks. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on building the inn. |
|---|---|---|
| Dragon's Inn Mold #51 | ||
| Will make all blocks needed to build the Dragon's Inn. Includes sloped roof blocks, wooden shutters, large & small arches and floor tiles. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on building the bridge. |
|---|---|---|
| Bridge Mold #53 | ||
| Will make all blocks needed to build the traveler's bridge. Special pieces include a 3" wide archway, bridge railings, stair builder block, and decorative trim pieces. | ||
| Price $34.00 |
 |
Description |
 |
|---|---|---|
| Inn Building Accessories Mold #57 | ||
| This mold is used to help finish the interior of an inn. Includes spiral and straight stairway pieces and rails, small stone pieces for fireplaces and ovens, wooden panels, rails and shelves, table and bench. | ||
| Price $34.00 |
 |
Description |
 | |
|---|---|---|---|
| Common Inn Accessories Mold #58 | |||
| This mold has commonly used items to dress up the interior of an inn. Includes 2 doors, bar counters, shelves, ship stairs, chairs round and square tables, chairs, window inserts and other small accessories. | |||
| Price $34.00 | |||
| Caution! This mold contains several small detailed bits that are more difficult to cast them normal. To get good results you need to use a surfactant and a vibrating table to get the plaster into the small pockets of the mold. Please refer to the Advanced Casting Instructions page on using a surfactant and vibrating table. | |||
 |
Description |
 | |
|---|---|---|---|
| Unique Inn Accessories Mold #59 | |||
| This mold has many tiny bits used to dress up an inn. Includes wardrobe, bed, desk, cabinets, shelves, wine rack, bottles, books, dishes and other tiny accessories. | |||
| Price $34.00 | |||
| Caution! This mold contains lots of tiny tiny bits! To get good results you need to use a surfactant and a vibrating table to get the plaster into the small pockets of the mold. Please refer to the Advanced Casting Instructions page on using a surfactant and vibrating table. | |||
 |
Description |
 Click here for instructions on using the Fieldstone Mold. |
|---|---|---|
| Fieldstone Wall Mold #70 | ||
| Will make walls that look like random fieldstones. Excellent for dungeons, cottages or any structure needing irregular stone. Also includes skull and torch sconce. | ||
| Price $34.00 |
 |
Description |
 |
|---|---|---|
| Fieldstone Basic Block Mold #701 | ||
| Contains basic fieldstone blocks of various lengths which include: A 3", two 2", two 1.5", eight 1", two 3/4" and four 1/2" long blocks. | ||
| Price $34.00 |
 |
Description |
 |
|---|---|---|
| Fieldstone Slab Mold #261 | ||
| Used to make quick fieldstone wall sections, floors and walkways. Rows can be snapped apart. | ||
| Price $29.00 |
 |
Description |
 Click here for instructions on using this accessory mold. |
|---|---|---|
| Fieldstone Accessories Mold #71 | ||
| This mold contains additional pieces that enhance the fieldstone mold #70. Pieces include a stair section, a 2" wide arch (when assembled), a door, recessed arches, rounded step pieces, a grate builder block, decorative railings, smooth columns and other decorative pieces. | ||
| Price $34.00 |
 |
Description |
 |
|---|---|---|
| 4" Round Fieldstone Mold #72 | ||
| This mold will make all the blocks needed to build the 4" round fieldstone tower. Includes arrow slit, circular staircase builder, decorative stone crenellations, a 5" diameter piece and a transition piece to seamlessly join a curved wall into a straight wall. | ||
| Price $34.00 |
 |
Description |
 |
|---|---|---|
| 6" Round Fieldstone Mold #73 | ||
| This mold will make all the blocks needed to build the 6" round fieldstone tower. Includes arrow slit, circular staircase step, decorative stone crenellations, a 7" diameter piece and a transition piece to seamlessly join a curved wall into a straight wall. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this mold. |
|---|---|---|
| Fieldstone Bridge Mold #74 | ||
| This mold will make all the blocks needed to build the fieldstone bridge. Includes 6" adjustable arch, hex shaped pillars, curved walkway tiles, step builder blocks and decorative pieces. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this mold. |
|---|---|---|
| Ruined Fieldstone Mold #75 | ||
| This mold will make pillars, ruined blocks, arches and floor tiles. Duplicate ruined pieces fit together to make full blocks, arches and floor tiles. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this Mold. |
|---|---|---|
| Fieldstone Windmill Mold #76 | ||
| This mold will make sloped blocks for tapered towers. Includes sloped blocks, special corner blocks, round top window, shingle strip, wood beam and hub piece for windmill sails. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this Mold. |
|---|---|---|
| Fieldstone Octagon Mold #77 | ||
| Will make blocks to build a 5" wide octagon tower (measured outside from flat to flat). Mold #70 is also needed to build the tower. It includes an arrow slit, brick edging for windows, floor expander bricks and decorative teeth. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this Mold. |
|---|---|---|
| 8" Fieldstone Tower Mold #78 | ||
| Will make blocks to build an 8" outside diameter tower. It includes basic building blocks, an arrow slit and decorative top pieces. Also includes 9" pieces to finish the top of the tower. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this Mold. |
|---|---|---|
| 3" Fieldstone Tower Mold #79 | ||
| Will make blocks to build a 3" outside diameter tower. Includes basic blocks, arrow slit, round topped window, floor tiles, support blocks for balconies, 4" diameter block and a transition block from straight to curved walls. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on painting these accessories. |
|---|---|---|
| Cavern Accessory Mold #85 | ||
| This mold will create the accessories shown which include barrels, crates, bucket, chest, crystals, grain sacks, campfire, coin pile, rock door, steel door, vase, wooden post and other items. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this Mold. |
|---|---|---|
| Wooden Conical Roof Mold #86 | ||
| This mold will make conical wood shingle roofs to fit 3", 4", 6" and 8" diameter towers. Also includes wooden braces and top decoration. The inside of the blocks have a fieldstone texture. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this Mold. |
|---|---|---|
| Slate Conical Roof Mold #87 | ||
| This mold will make conical slate shingle roofs to fit 3", 4", 6" and 8" diameter towers. Also includes stone braces and top decoration. The inside of the blocks have a chipped stone texture. | ||
| Price $34.00 |
 |
Description |
 Click here for instructions on using this mold. |
|---|---|---|
| Floor Tiles Various Sizes Mold #201 | ||
| Used for floor tiles, steps and floor mosaic designs. Regular chipped stone texture. | ||
| Price $29.00 |
 |
Description |
 |
|---|---|---|
| Cracked Floor Tiles Mold #203 | ||
| These floor tiles have a smooth worn surface with random cracks. If you don't want the cracks, see mold #206 instead. | ||
| Price $29.00 |
 |
Description |
 For instructions on how to paint this tile to look like lava, visit our Painting Instructions page. |
|---|---|---|
| Large Cracked Floor Tiles Mold #204 | ||
| These 1 1/2" floor tiles have a smooth worn surface with random cracks. | ||
| Price $29.00 |
 |
Description |
 Click here to see how this mold was used for floors in the Gothic Dungeons. |
|---|---|---|
| Gothic Floor Tiles Mold #205 | ||
| Includes a variety of floor styles such as border tiles, herring bone brick tiles, diamond pattern tiles and two styles of fancy smooth tiles. | ||
| Price $29.00 |
 |
Description |
 |
|---|---|---|
| Worn Floor Tiles Mold #206 | ||
| These floor tiles have a smooth worn surface. These tiles are exactly like the tiles on mold #203 except without the cracks. | ||
| Price $29.00 |
 |
Description |
  |
|---|---|---|
| Cobblestone Mold #210 | ||
| Used to make cobblestone streets and floors. | ||
| Price $29.00 |
 |
Description |
 |
|---|---|---|
| Large Cobblestone Mold #211 | ||
| Used to make cobblestone streets and floors. These pieces interlock in order to hide the seam lines. | ||
| Price $29.00 |
 |
Description |
 Click here for instructions on how to use the plank mold. |
|---|---|---|
| Wooden Plank Mold #220 | ||
| Used to make wooden floors, cottages, stairs, bridges, doors, tables and almost any wooden objects you can think of. | ||
| Price $29.00 |
 |
Description |
 |
|---|---|---|
| Inn Floor Mold #221 | ||
| Used to make wooden floors for inns and cottages. Includes 3 different plank patterns. | ||
| Price $29.00 |
 |
Description |
  |
|---|---|---|
| Clay Tile Roof Mold #230 | ||
| Used to make clay tile roofs for Greek, Roman, Spanish and Oriental style roofs. | ||
| Price $29.00 |
 |
Description |
 |
|---|---|---|
| Wood Shingle Roof Mold #240 | ||
| Used to make wood shingle roofs quickly and easily. Click here to see examples. | ||
| Price $29.00 |
 |
Description |
Photos and instructions coming soon. |
|---|---|---|
| Slate Shingle Roof Mold #245 | ||
| This mold will make flat slate shingle roofs quickly and easily. Also includes stone braces and top decoration. | ||
| Price $29.00 |
 |
Description |
 Click here to see examples of how this mold can be used. |
|---|---|---|
| Small Brick Mold #250 | ||
| Used to make small stone items such as fireplaces, tombs, forges, wells, etc. Also can be used to make small brick wall sections for scales less than 25mm. | ||
| Price $29.00 |
 |
Description |
 Click here for instructions on using the Flagstone Mold. |
|---|---|---|
| Flagstone Floor Tile Mold #260 | ||
| Used to make flagstone floor tiles. These can be arranged in a grid for easy character movement or randomized using the smaller pieces for a fairly seamless floor. | ||
| Price $29.00 |
 |
Description |
 Click here for instructions on using the Large Flagstone Mold. |
|---|---|---|
| Large Flagstone Mold #265 | ||
| These 1 1/2" flagstone tiles are the perfect size for making MageKnight dungeons. They are 1/4" thick and are great for covering large areas of floor. | ||
| Price $29.00 |
 |
Description |
 |
|---|---|---|
| Large Floor Tile Mold #267 | ||
| These 1 1/2" flagstone tiles are the perfect size for making MageKnight dungeons. They are 1/4" thick and are of the same chipped stone texture as mold #201. | ||
| Price $29.00 |
 |
Description |
 |
|---|---|---|
| Brickwork Floor Tile Mold #268 | ||
| These 1 1/2" floor tiles have two different styles of brick texture on them which work nicely for streets or paved areas. | ||
| Price $29.00 |
To place an order immediatly, visit our Online Shopping Cart
 |
 |
 |
"Castlemolds(R)" is a trademark of Hirst Arts Fantasy Architecture Inc.
For more information contact bruce@hirstarts.com.