Star Fortress Building Instructions Page 6
Mandark Building |
The Plaza |
AT&T Building |
Observation Tower |
Howitzer Cannons |
|
Anti Aircraft |
Mobile Defense |
To build all of the items shown here, you will need 12 castings of each of the following molds:
#312 Star Fortress Mold A, #313 Star Fortress Mold B, #314 Star Fortress Mold C and #275 Techno Floor Mold.
You will need this parts list to build these items!
Click on the icon on the right to bring up a PDF file of the parts list. These are all of the parts from molds #312 (mold A), 313 (mold B) and 314 (mold C).
The reference numbers of these parts are referred to in the instructions and also the videos.
Mandark Building
71. | Parts List Part# - Quantity
|
---|
72. |
---|
The Plaza
73. | Parts List Part# - Quantity
|
---|
74. | The A20 blocks have the angles facing away from you. |
---|
75. |
---|
76. | Place the A13 block (far left) so that half of it completely covers the A19 block underneath and other half will set onto the A1 block. |
---|
AT&T Building
77. | Parts List Part# - Quantity
|
---|
78. | This piece will be easier if you pre-glue the C22 conduit blocks together first. The A24 block on the right photo is laid on its back so the dish angle will be slightly more flat. |
---|
Observation Tower
79. | Parts List Part# - Quantity
|
---|
80. | The slope of the B4 and the B7 blocks line up on the right side. The C14 gun goes on the rounded part of the block. The C2 block overlaps onto the C8 block. |
---|
Howitzer Cannons
81. | Parts List Part# - Quantity
|
---|
82. | In the far left photo, the A14 block is centered onto the 1" square base. The B23 blocks go on both sides of this block so you will need four B23 blocks in total here. Make 2 of these. |
---|
Anti Aircraft
83. | Parts List Part# - Quantity
|
---|
84. | Position the C16 piece so you can add the C32 piece onto the rounded section later on. Make 2 of these. |
---|
Mobile Defense
85. | Parts List Part# - Quantity
|
---|
86. | In the second photo above, the floor tiles are offset by 1/4". In the right photo, the corners of the floor tiles need to be trimmed so that the C26 conduit piece will fit properly. Make 2 of these. |
---|
87. |
---|